Two-wheel drive to front or rear wheels or four-wheel drive is allowed. Chassis must have independent suspension on all four wheels. Each driven wheel must have a flexible joint, eg: dog bone/s or universal joint/s in its driveshaft. Drive train and suspension design is free from restriction. Flat Pan (1/12th and 1/10th Track Style) chassis are not allowed. The Chassis must not be shaped to gain an aerodynamic advantage. In principle the underside of the chassis must be flat and parallel to the ground along the entire length of the body-shell. Aerodynamic shaped parts (splitters/diffusers/tunnels/etc) may not be fitted to the chassis.


                     Turnigy TrackStar 21.5T 1855KV sensored brushless motor. P/N:9192000034 ONLY.
Motor end bell timing must be set to Zero “0”.  No motor modifications are allowed. Note: Motors are available from: Hobbyking Australian Warehouse.
Hobby King


Any ESC that does not have Dynamic timing ie; boost or turbo timing options, or any ESC that has a “Blinky” mode ie; a flashing light denotes that no dynamic timing is enabled, is allowed.

Body Shell

4 door sedan style bodies are allowed that are currently on the IFMAR, EFRA or ROAR body listings, and fit within the GLOBAL BODY SPECIFICATIONS for electric touring cars.


Rubber tyres only (24mm)

Hop Ups

Any Hop Ups that are available from the Manufacturer


Any 2 cell Hard-cased approved 7.4 Lipo packs as listed on the ROAR or EFRA websites.


Gearing is set no less to 4.5 final drive ratio (FDR)


Minimum 1350 grams ready to run including transponder.