Bendigo On Road Radio Control Car Club
powered by TidyHQModified Rules
Modified Rules
Modified Rules
Chassis
Two-wheel drive to front or rear wheels or four-wheel drive is allowed. Chassis must have independent suspension on all four wheels. Each driven wheel must have a flexible joint, eg: dog bone/s or universal joint/s in its driveshaft. Drive train and suspension design is free from restriction. Flat Pan (1/12th and 1/10th Track Style) chassis are not allowed. The Chassis must not be shaped to gain an aerodynamic advantage. In principle the underside of the chassis must be flat and parallel to the ground along the entire length of the body-shell. Aerodynamic shaped parts (splitters/diffusers/tunnels/etc) may not be fitted to the chassis.
Motor
Only Brushless motors approved by IFMAR, ROAR, EFRA or BRCA may be used.
Body Shell
4 door sedan style bodies are allowed that are currently on the IFMAR, EFRA or ROAR body listings, and fit within the GLOBAL BODY SPECIFICATIONS for electric touring cars.
Tyres
Rubber tyres only (24mm)
Hop Ups
Any Hop Ups that are available from the Manufacturer
Batteries
Any 2 cell Hard-cased approved 7.4 Lipo packs as listed on the ROAR or EFRA websites.
Gearing
Gearing is not restricted.
Weight
Minimum 1350 grams ready to run including transponder.